Product Description
Product Description
Industrial Oil free screw air compressor
Main Applications
    Oil-free screw air compressors are widely used in industries that require high-quality air sources such as medicine, food, electronics, chemicals, packaging, etc. 100% pure compressed air is a necessary measure to ensure process and product quality, and high-end products that can be produced risk-free and safely.
   The lubrication system in oil-free screw air compressors is a separated oil supply circulation unit, the compression chamber and the bearing are tightly separated by a high-performance mechanical seal assembly. The lubricating oil can only flow in the enclosed area and cannot enter the compression chamber. The compressed room is pure air that is not contained. After a little treatment of water and dust removal, 100% pure compressed air can be obtained.
   The oil-free screw air compressor compresses the air through a two-stage screw rotor, and removes the water in the compressed air through a water-gas separator. At the same time, because there is no spread oil cooling, a pre-cooler, intercooler, and after-cooler are generally configured to cool the compressed air to reach the required exhaust temperature. A shaft seal with excellent performance is used on the shaft of the rotor to prevent lubricating oil from leaking into the compressed air to achieve true oil-free.
  The oil-free screw air compressor is a positive displacement gas compression machine with a rotary motion of the working volume. The compression of the gas is achieved by the change of the volume, and the change of the volume is achieved by the rotary motion of a pair of rotors of the air compressor in the casing.
Characteristic:
- The screw main engine, pipes, and parts are all made of corrosion-resistant special stainless steel materials
- Using S-K-F bearings, independent internal air-sealing technology, to ensure that the lubricating water will never contact the bearing, and to maintain the service life of the bearing
- Unique water filtration and lubrication system to ensure good lubrication, sealing, noise reduction and cooling functions
- 100% pure and oil-free, 100% oil-free compression system, low noise, super energy saving;
- Environmental protection and high efficiency: Since there is no lubricating oil, there is no oil pollution; the high-precision water filter ensures that the lubricating water maintains clean quality.
- Ideal isothermal compression: Since the cooling performance of water is much higher than air compressor oil’ s cooling performance, the operating temperature of the oil-free screw air compressor is only 40°C, which is close to the suction temperature, achieving high-efficiency ideal isothermal compression.
- Reliable and user-friendly design, reasonable layout, simple and fast service channel, easy maintenance or fault repair
- The back end of the air compressor can be equipped with supporting equipment and systems such as refrigerated CHINAMFG dryer, adsorption dryers, precision filters, gas storage tanks, etc.
- The air compressor can choose the gas output of 1-60m³/min, the pressure is 7bar Â
- 0.1m³~100m³ gas storage tanks of more than 200 specifications with different volumes
- Flaw detection, water pressure test, 100% non-destructive test for the butt weld seam of the gas storage tank
- The best energy-saving working conditions can be set according to dew point requirements, inlet flow, pressure, and temperature
Â
Product Parameters
Â
Performance Features
- The conventional process flow of the air compressor system: air compressor → gas storage tank → precision filter → refrigerated dryer → adsorption dryer → precision filter → precision filter → activated carbon filter → gas storage tank
- The air compressor can be driven by fixed frequency or variable frequency, with precise control, saving at least 30% of energy consumption
- The air compressor can realize remote real-time monitoring and intelligent maintenance
- The air compressor can adopt a touch screen intelligent controller with powerful control and communication functions
- The screw main engine uses three-wire meshing, non-equal width tooth technology, meshing pair water film contact, no wear, good force balance
Â
Company Profile
Â
Our Advantages
Certifications
Packaging & Shipping
Â
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Field Installation, Commissioning and Training |
|---|---|
| Warranty: | 1 Year |
| Lubrication Style: | Oil-free |
| Samples: |
US$ 7500/Piece
1 Piece(Min.Order) | Order Sample |
|---|
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
What Are the Downsides of Using Oil-Free Air Compressors?
While oil-free air compressors offer numerous advantages, there are also some downsides to consider. Understanding these drawbacks is important when evaluating the suitability of oil-free compressors for specific applications. Here’s a detailed explanation of the downsides of using oil-free air compressors:
1. Higher Initial Cost:
Oil-free air compressors generally have a higher initial cost compared to oil-lubricated compressors. The design and technology used in oil-free compressors, such as specialized coatings, precision manufacturing, and advanced filtration systems, contribute to their higher price tag. This can be a significant factor for budget-conscious buyers or for applications where cost is a primary consideration. However, it’s important to weigh the initial cost against the long-term benefits and potential cost savings in terms of maintenance, energy efficiency, and reduced risk of oil contamination.
2. Reduced Durability:
Oil-free compressors may have slightly reduced durability compared to oil-lubricated compressors. The absence of oil for lubrication can result in increased wear on certain components, such as piston rings, valves, and bearings. However, modern advancements in materials and engineering have significantly improved the durability and lifespan of oil-free compressors. With proper maintenance and adherence to recommended operating conditions, oil-free compressors can still provide reliable performance over an extended period.
3. Higher Energy Consumption:
Oil-free air compressors typically have higher energy consumption compared to oil-lubricated compressors. The absence of oil for lubrication increases friction within the compressor, requiring more energy to overcome this resistance. However, advancements in compressor design, such as improved air ends, energy-efficient motors, and variable speed drives, have helped minimize this energy consumption gap. Additionally, the potential energy savings from eliminating the need for oil changes and reducing the risk of pressure drops due to oil contamination can offset the higher energy consumption over the compressor’s lifetime.
4. Limited Cooling Capacity:
Oil-free compressors may have limited cooling capacity compared to oil-lubricated compressors. Oil acts as a lubricant and coolant in oil-lubricated compressors, effectively dissipating heat generated during compression. In contrast, oil-free compressors rely on other cooling mechanisms, such as air or water cooling, which may have limitations in handling high heat loads. This can be a consideration for applications that require continuous or high-duty cycle operation in elevated ambient temperatures. Adequate cooling systems and proper monitoring of temperature limits are necessary to prevent overheating and ensure optimal performance of oil-free compressors.
5. Noisy Operation:
Oil-free air compressors are generally noisier compared to oil-lubricated compressors. The absence of lubricating oil can result in increased noise levels due to direct metal-to-metal contact between rotating and reciprocating parts. However, advancements in noise reduction technologies and sound insulation materials have helped mitigate this issue to some extent. Additionally, the noise level can vary between different models and brands of oil-free compressors, so it’s important to consider the specific noise requirements of the application and select a compressor that meets those criteria.
Despite these downsides, oil-free air compressors have become increasingly popular and widely used in various industries due to their advantages in providing clean, oil-free compressed air. It’s important to assess the specific requirements of the application, consider the trade-offs, and consult with compressed air experts to determine whether an oil-free compressor is the most suitable choice.
.webp)
How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?
To troubleshoot common problems with oil-free compressor systems, follow these steps:
1. Check Power Supply:
Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.
2. Inspect Air Filters:
Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.
3. Check for Air Leaks:
Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.
4. Monitor Pressure Gauges:
Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.
5. Check for Excessive Heat:
Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.
6. Inspect Drains and Condensate Management:
Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.
7. Review Maintenance Records:
Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.
8. Consult Manufacturer’s Documentation:
Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.
9. Seek Professional Assistance:
If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.
Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer..webp)
What Is an Oil-Free Air Compressor?
An oil-free air compressor, also known as an oilless air compressor, is a type of air compressor that operates without the use of lubricating oil in the compression chamber. Unlike traditional air compressors that rely on oil for lubrication and sealing, oil-free compressors employ alternative methods to achieve compression and deliver clean, oil-free compressed air. Here’s a detailed explanation of how oil-free air compressors work and their key characteristics:
Working Principle:
Oil-free air compressors utilize various techniques to compress air without the need for oil. The most common methods include:
- Dry Compression: In this method, the compression chamber doesn’t have any oil present. Special materials, coatings, and surface treatments are used to reduce friction and wear between the moving parts, allowing for efficient compression without oil lubrication.
- Water or Air Cooling: Oil-free compressors often employ advanced cooling mechanisms, such as water or air cooling, to dissipate the heat generated during compression. This helps to maintain the operating temperature within acceptable limits and ensures the longevity of the compressor.
- Piston Rings and Seals: Instead of relying on oil for lubrication and sealing, oil-free compressors use specialized piston rings, seals, or other forms of dry frictionless technology. These components provide the necessary sealing and reduce internal friction, allowing for efficient compression without the need for oil.
Characteristics of Oil-Free Air Compressors:
1. Clean and Oil-Free Air: The primary advantage of oil-free air compressors is that they deliver air that is free from oil contamination. This makes them suitable for applications where oil contamination can be detrimental, such as in the medical, pharmaceutical, food and beverage, electronics, and automotive industries.
2. Low Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings and reduced downtime.
3. Compact and Lightweight: Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This makes them suitable for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.
4. No Oil Contamination Risk: With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air, simplifying the overall system design.
5. Lower Initial Cost: In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.
It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.
By understanding the working principle and characteristics of oil-free air compressors, users can determine whether this type of compressor is suitable for their specific application and requirements.
editor by CX 2024-02-02