Product Description
Product Description
Product function: It’s suitable For low-efficiency wells, test wells and remote wells wellhead natural gas recovery, local production of CNG. finished products The dry gas recovery skid can adapt to the characteristics and working conditions of well gas, the installation is simple, the period is short, and it is convenient for the rapid transfer of equipment.
The equipment flow diagram is as follows:
To better adapt to the field conditions of well gas recovery, the air intake separation system uses a high pressure separator to separate the gas and liquid level, using a liquid level controller to automatically control the liquid level; the pressurization system uses a hydraulic piston compressor, which can meet the intake pressure range of 3-20 MPa. Pressurization to 25 MPa, is more energy-efficient and leak-free than traditional mechanical pressurization, with low failure rate, high reliability and simple maintenance; the drying system adopts the A,B tower molecular sieve mode, which can be dried and regenerated simultaneously, with a maximum drying capacity of 2000 Nm3h, dew point is -55ºC; the control system is controlled by PLC logic control program to control each process such as separation, pressurization, drying, metering, instrument wind and so on, to realize unattended, automatic opening / stopping control; The filling metering system adopts mass Flowmeter, which meets the requirements of the state on metering, measuring range :1~4000 N m3/ h.
Application and parameter:
1.Gas intake separation system 2.Supercharging system 3.Drying system 4.Control system
5.Filling metering system 6. Fuel gas supply system 7. Housing system
| Structure | skid |
| Suction pressure | 3-20Mpa |
| Discharge pressure | 25Mpa |
| Gas treated ( Nm3/d) | 20000-50000 |
| Amount of treatment (t/d) | 50 |
| Main motor power | 135kw |
| Noise | ≤75dBa |
| Size | 10000mm*3000mm*3000mm |
| Total power | 170KW |
| Fuel tank (L) | 1500 |
| Scope of measurement (Nm3/h) | 1-4000 |
| Weight | ≈24t |
Product Advantage:
1. Skidding, high degree of integration, good flexibility, short construction period.
2.High degree of automation, centralized control points, low labor intensity.
3. Compressor adopts hydraulic piston type, which has the characteristics of wide intake range, energy saving, no leakage, very low failure rate and simple maintenance, so it can better adapt to the characteristics of large variation of wellbore pressure range.
4. No need to be equipped with water jacket CHINAMFG and pressure regulating equipment, safety risks are small, no throttling energy waste.
5.Use high pressure post dehydration, dehydration effect is good, conducive to product sales.
6. Recovery process equipment has strong adaptability to wellhead pressure and components, and the equipment input cost is small.
Company Profile
HangZhou Qidakon Energy Equipment Co., Ltd was established in 2007 in HangZhou, ZheJiang Province, with a plant covering an area of 18,000 square meters. We are specializing in the R&D, production and sales of natural gas compressor series products, we adhere to the professional, fine, specialty, brand development of the road, to provide customers with the best overall technical solutions of high-tech enterprises. Professional production and manufacturing of natural gas compressor for CNG filling station and its service, professional production and manufacturing of natural gas compressor for oil and gas field natural gas extraction, recovery, gathering and transportation, storage and transportation and after-sales service, products and services have covered the CNG market all over the country and major domestic oil and gas fields, and radiation to Russia, India and other Belt and Road foreign markets.
Qidakon company has always been committed to technological innovation. Its core business team has more than 30 years of working experience in compressor design and manufacturing, and led the drafting of the industry standard for hydraulic natural gas compressors for automobile filling stations (JB/T11422-2013). Obtained nearly 100 national patents, won the national technology innovation fund, and the first in the industry through the whole machine safety explosion-proof certification, by the Ministry of Science and Technology technology innovation fund committee identified as the national technology innovation products, with its “safety, energy saving, environmental protection, investment province, simple structure and many other advantages, in more than 20 provinces (autonomous regions) used, Market share is among the best, its technical advancement, reliability, economy and industry leading position by the national attention.
Qidakon adheres to the enterprise mission of “gas melts everything, the way to secure the world”, adheres to the business philosophy of “customer first and sustainable development”, forms the core values of “loyalty and dedication, innovation and transcendence, truth-seeking and honest, fair sharing” and the enterprise spirit of “persistence, cooperation, gratitude, tolerance, dedication”, and is determined to become a global CHINAMFG brand of gas supercharging system.
Our Advantages
Professional R&D Team
About 100 technical patents
Industry standard setter
The national industry standard JB/T 11422-2013 setter, Hydraulic Natural Gas Compressor for Automobile Filling Station, drives the technical progress of the industry and leads the development direction of the industry.
Advanced production workshop and strict production process
Sapare parts area Welding
Assemble skiding Pre-factory commissioning
Strict quality control process and testing
Certification and Honor
Partner & Cases
CNG refueling station site
Indian partner
After Sales Service
Service Purpose: Cusomer’s Satisfaction Our Pursuit
Pre- Sale Services
Provide installation and commissioning training for customer operators according to customer requirements. At the same time, organize and register product information and set up customer files.
Services on sale
The prodessional technical service engineer guides the installation and commissioning on the side or on the line. Andwarning of the possible failure of the equipment.
After-Sales Service
Timely and rapid response ,24-hour on-line service, provide lifelong maintenance.
FAQ
1.How long is the lead-time of production?
30-60Days.
2. What is the configuration of the whole skid equipment?
According to different customer needs to do the country’s explosion-proof certification and industry certification.
3.Which sea ports are supported for shipment?
ZheJiang ,HangZhou or Other international ports in China.
4.What payment methods are supported?
T/T, LC, D/P D/D ect.
5.What technical support is available?
We provide basic parameters for customers’ reference before sales; conduct relevant certifications according to customers’ requirements during sales; be responsible for online debugging until successful operation after sales; arrange technicians to provide on-site guidance when necessary.
6.How long is the warranty period?
For a period of 12 months from the date of commissioning at end customer site or 15 months from the date of receipt by purchaser , whichever is earlier.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24 Hours |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Cylinder Arrangement: | Parallel Arrangement |
| Cylinder Position: | Vertical |
| Customization: |
Available
|
|
|---|
.webp)
What Are the Downsides of Using Oil-Free Air Compressors?
While oil-free air compressors offer numerous advantages, there are also some downsides to consider. Understanding these drawbacks is important when evaluating the suitability of oil-free compressors for specific applications. Here’s a detailed explanation of the downsides of using oil-free air compressors:
1. Higher Initial Cost:
Oil-free air compressors generally have a higher initial cost compared to oil-lubricated compressors. The design and technology used in oil-free compressors, such as specialized coatings, precision manufacturing, and advanced filtration systems, contribute to their higher price tag. This can be a significant factor for budget-conscious buyers or for applications where cost is a primary consideration. However, it’s important to weigh the initial cost against the long-term benefits and potential cost savings in terms of maintenance, energy efficiency, and reduced risk of oil contamination.
2. Reduced Durability:
Oil-free compressors may have slightly reduced durability compared to oil-lubricated compressors. The absence of oil for lubrication can result in increased wear on certain components, such as piston rings, valves, and bearings. However, modern advancements in materials and engineering have significantly improved the durability and lifespan of oil-free compressors. With proper maintenance and adherence to recommended operating conditions, oil-free compressors can still provide reliable performance over an extended period.
3. Higher Energy Consumption:
Oil-free air compressors typically have higher energy consumption compared to oil-lubricated compressors. The absence of oil for lubrication increases friction within the compressor, requiring more energy to overcome this resistance. However, advancements in compressor design, such as improved air ends, energy-efficient motors, and variable speed drives, have helped minimize this energy consumption gap. Additionally, the potential energy savings from eliminating the need for oil changes and reducing the risk of pressure drops due to oil contamination can offset the higher energy consumption over the compressor’s lifetime.
4. Limited Cooling Capacity:
Oil-free compressors may have limited cooling capacity compared to oil-lubricated compressors. Oil acts as a lubricant and coolant in oil-lubricated compressors, effectively dissipating heat generated during compression. In contrast, oil-free compressors rely on other cooling mechanisms, such as air or water cooling, which may have limitations in handling high heat loads. This can be a consideration for applications that require continuous or high-duty cycle operation in elevated ambient temperatures. Adequate cooling systems and proper monitoring of temperature limits are necessary to prevent overheating and ensure optimal performance of oil-free compressors.
5. Noisy Operation:
Oil-free air compressors are generally noisier compared to oil-lubricated compressors. The absence of lubricating oil can result in increased noise levels due to direct metal-to-metal contact between rotating and reciprocating parts. However, advancements in noise reduction technologies and sound insulation materials have helped mitigate this issue to some extent. Additionally, the noise level can vary between different models and brands of oil-free compressors, so it’s important to consider the specific noise requirements of the application and select a compressor that meets those criteria.
Despite these downsides, oil-free air compressors have become increasingly popular and widely used in various industries due to their advantages in providing clean, oil-free compressed air. It’s important to assess the specific requirements of the application, consider the trade-offs, and consult with compressed air experts to determine whether an oil-free compressor is the most suitable choice.
.webp)
Can Oil-Free Air Compressors Be Used in Cold Climates?
Yes, oil-free air compressors can be used in cold climates. Here’s a detailed explanation of the considerations and adaptations that may be necessary when using oil-free compressors in cold weather:
1. Cold-Start Capability:
Oil-free compressors should be designed and equipped with features that enable them to start and operate reliably in cold temperatures. This includes components such as low-temperature lubricants, preheating systems, and specialized insulation to prevent freezing or damage to critical parts.
2. Compressed Air Drying:
In cold climates, the moisture content in the compressed air can condense and freeze, leading to operational issues and potential damage to the compressed air system. It is crucial to incorporate proper compressed air drying equipment, such as refrigerated dryers or desiccant dryers, to remove moisture from the compressed air and prevent freezing within the system. This ensures the production of dry and reliable compressed air even in cold weather conditions.
3. Freeze Protection:
Special attention should be given to protecting the compressor and associated components from freezing. This may involve insulation, heat tracing, or the use of frost protection heaters in critical areas susceptible to freezing, such as air intakes, valves, filters, and condensate drains. Adequate insulation can help maintain optimal operating temperatures and prevent freezing-related issues.
4. Cold Weather Lubricants:
In extremely cold climates, it is essential to use specific lubricants that are designed to perform effectively at low temperatures. These lubricants should have low pour points and be capable of providing sufficient lubrication and protection to the compressor’s moving parts even in cold environments. Using the appropriate lubricants ensures reliable operation and prevents damage to the compressor during cold starts and operation.
5. Preventive Maintenance:
Regular preventive maintenance is crucial when using oil-free compressors in cold climates. It is essential to follow the manufacturer’s recommendations for maintenance tasks such as filter replacements, lubricant changes (if applicable), and inspection of critical components. Cold weather conditions can exacerbate wear and tear on equipment, so proper maintenance helps identify and address potential issues before they lead to operational problems.
6. Monitoring and Control:
Implementing advanced monitoring and control systems can provide real-time information about the compressor’s performance in cold climates. Monitoring parameters such as temperature, pressure, and system efficiency can help identify any deviations or potential issues caused by low temperatures. Additionally, control systems can optimize compressor operation and adjust parameters to ensure efficient performance in cold weather conditions.
It’s important to consult the manufacturer’s specifications and guidelines for the specific oil-free compressor model being used, as they may provide additional recommendations or requirements for operating the compressor in cold climates. Adhering to these guidelines and implementing appropriate adaptations will help ensure the reliable and efficient performance of oil-free air compressors in cold weather environments.
.webp)
Are Oil-Free Air Compressors More Environmentally Friendly?
Oil-free air compressors are considered more environmentally friendly compared to oil-lubricated air compressors. These compressors offer several features and advantages that contribute to their eco-friendly nature. Here’s a detailed explanation of why oil-free air compressors are considered more environmentally friendly:
1. Elimination of Oil Contamination:
One of the significant environmental benefits of oil-free air compressors is the elimination of oil contamination in the compressed air system. Oil-lubricated compressors require oil for lubrication, which can potentially leak or contaminate the compressed air. Oil contamination can have adverse effects on downstream equipment, processes, and the environment. In contrast, oil-free air compressors operate without oil, ensuring clean, oil-free compressed air and eliminating the risk of oil contamination.
2. Reduction of Oil Spills and Leaks:
Oil-lubricated compressors have a higher risk of oil spills or leaks due to the presence of lubricating oil in the system. Oil spills can have severe environmental consequences, polluting soil, water bodies, and ecosystems. Oil-free air compressors eliminate the risk of oil spills or leaks, as there is no oil used in the compression process. This reduces the potential harm to the environment and minimizes the need for costly cleanup efforts.
3. Energy Efficiency:
Oil-free air compressors can be more energy-efficient compared to oil-lubricated compressors. The absence of oil in the compression chamber reduces internal friction and mechanical losses, resulting in improved energy efficiency. Energy-efficient compressors consume less electricity, leading to reduced energy consumption and lower greenhouse gas emissions. By using oil-free compressors, businesses can contribute to energy conservation and environmental sustainability.
4. Lower Environmental Footprint:
Due to the elimination of oil-related maintenance tasks, such as oil filtration, oil changes, and oil disposal, oil-free compressors have a lower environmental footprint. These maintenance activities associated with oil-lubricated compressors require the use of resources and generate waste, including used oil and oil filters. By using oil-free compressors, the consumption of resources and the generation of hazardous waste are reduced, contributing to a more sustainable and environmentally friendly operation.
5. No Oil Contamination in Air Tools and Products:
Oil contamination in compressed air can have detrimental effects on air tools, pneumatic equipment, and end products. Oil-free air compressors ensure that the compressed air delivered to these devices is clean and oil-free. This helps maintain the performance and longevity of air tools and prevents oil-related product defects. By using oil-free compressors, businesses can avoid costly repairs or replacements of equipment and minimize the risk of producing non-conforming or defective products.
It’s important to note that while oil-free air compressors offer environmental advantages, they may have certain limitations and considerations. These include the need for specialized maintenance, potential higher operating temperatures, and reduced maximum operating pressures compared to oil-lubricated compressors. Therefore, it’s essential to evaluate the specific requirements of the application and consider the trade-offs between environmental benefits and operational considerations when choosing an air compressor.
editor by CX 2024-02-17